This year we have a commission to supply and fit a stained glass window in the new Poulfur School building. This is under the % for art scheme which provides arts funding to new buildings. The installation will be above the entrance doors at the front of the building. It will be visible from both the first and ground floor levels. Space comprises an upper and lower section total size approx 12 ft high by 9 ft 3ins wide.
After discussions with the Board of Management, we agreed upon the design above. This assumed a square-shaped window but this had changed after the installation of the frame. So we then had to incorporate the design into the available space. Armed with all the measurements we drafted a working drawing. A secondary interior frame would house the glass panels.
This proved to be a lengthy process and definitely worth taking some time over. With the working drawing complete to scale the full-size patterns were then prepared. We had all the measurements to construct the secondary frame. This would then gives us the template sizes for all individual panels.
First Panel At this point, I had a rough idea of the colors and glass types I was going to use. I figured it would be best to start at the top of the installation. It would then be easier to make any adjustments as I worked down the design. I prefer to work this way as it keeps everything looking fluid and fresh. This was also the largest panel, the top section being 6 inches taller than the bottom section. Having completed this panel I then moved on to the side panels. I now had the benefit of being able to view these placed next to the large panel.
Right-Hand Side Panel
There is only one panel on the right-hand side so I have done this first. The frame between these two panels is 6 inches wide and I have made an allowance for this.
Left-Hand Side Panels
The inner panel on the left-hand side is about 2 inches thinner than the outside panel. There is also an allowance for two 6 inch frame pieces on this side of the window.
Left and Right-Hand Side Panels
Here are the three smaller panels together, two left and the one on the right. It’s also important to note that the glass will completely change color once lit from behind.
Two Left-Hand Panels
Here are the two left-hand panels with the light behind them spaced 6 inches apart to replicate the frame. As you can see from the previous photo some of the glass now looks clear. This is because it is very pale and when all the window is complete everything will blend together. This completes the top four panels.