I have called this post ” Slade Poppies Part 2 ” as it is about bringing the top and bottom section together. The second row of flowers have now been added and at this point, I am quite happy with the way things are progressing. Even so one can never be sure exactly how it’s going to look once the backlighting is introduced. The method I use is to hold the glass up to the light and make my selection before cutting and proceed that way. It’s the same system I use for all my work, something I have developed over many years. A lot of glass artists like to mount their pieces on a sheet of clear glass using Blu Tack which is then held up to the light. This provides a comprehensive preview of the panel, although it would be fairly time-consuming.
With the top and bottom sections progressing so well I have now decided to build the two sides. This will help connect the two sections together. Starting out with the right-hand side which worked out well I then moved onto the left. I have also added a couple of blooms just above the leaves. Feeling pretty good about the way it’s going now and looking forward to filling in the middle section.
There is never a particular place for starting to cut out the glass for a project. With this panel, I began by first cutting the leaves and soil pieces at the bottom of the panel. I was fairly confident with my glass choices here, using a Youghiogheny stipple glass 4117 SP green, ice white, bluish-grey was for the leaves and a granite backed Uroboros 65 – 17 light & dark browns for the soil pieces. The spaces for the seed pods have been left empty at this stage as I will add them later when I have a better idea of the finished panel.
The top and bottom background pieces were then cut from the whole sheet of Uroboros 10 – 16 light & dark browns, turquoise with mini fractures. This is can be tricky even with the use of a band saw so worth taking your time over. The two sides have worked out fine but the middle piece has broken off in slightly the wrong place. These things happen which means I will have to adjust the pattern slightly by moving a couple of flowers.
Slade Poppies ( Initial Stage ) Adding The Flowers
With the first of the flowers cut I am able to position them on top of the background glass. I then mark around them using a fine permanent marker. The background can now be cut away using the band saw, leaving a perfect fit for the flower. This can be a slow process but the advantage is I am able to build up the image as I go. The glass used for the poppies is Uroboros 60 – 25 red & orange with white.
Here I have managed to re-position the two flowers in the middle of the panel. This completes the top and bottom sections leaving the central part to do. However, now everything is back on track I am feeling confident of a successful outcome.
The Apple Blossom with its beautiful pink and white flowers is in fact a member of the rose family. Appearing from early May apple blossoms are larger and more robust than similar cherry blossoms. They produce a sweet scent that attracts bees and other insects. Flowering between 3 to 10 days when pollination occurs, after which time they lose their petals. They are also said to represent good fortune, hope and preference which make them a perfect subject for stained glass.
I have decided to stay with the ” Tiny Tiffany ” format of a 12-inch round panel for this Apple Blossom design. The background glass is a Uroboros fracture glass code 10-55 Cobalt Blue, White and Green. Gold pink and white, plus gold pink and purple make up the flowers and the leaves are light green with spring green highlights. This is a great project if you have lots of scrap art glass and makes a beautiful Mothers Day gift. You can display the panel in a window or placed it on a stand as shown here. The original panel size is 12 inches, ( 305 mm ) in diameter.
Downloadable PDF pattern prints actual size 12-inch diameter, ( 305 mm x 305 mm ) across four pages. Instructions provided for enlarging the pattern to your required size when printing. You will need Adobe Acrobat Reader to print this pattern.
A universal flower poppies symbolise peace, death and even sleep. In oriental cultures, they represent passionate love between couples. The Ancient Greeks in particular related the flower to Morpheus the god of sleep. This was most likely the source of the word Morphine which comes from Opium. Yet the inspiration for this Red Poppies Pattern comes from the Remembrance Poppies. Quite strange when you think about it as they are only paper flowers. Poppies of course come in a range of colors, blue, pink, white and orange spring to mind, a universal flower for sure. It is the state flower of California and also the birthday flower for August.
Made using Youghiogheny stipple glass, I have tried to keep the design simple and let the glass do the work. I have poppies growing wild in my garden and I am always struck by the way the red compliments the green surrounds. They also grow in clumps so I have crammed fourteen blooms into this panel. This post wouldn’t be complete without a link to Canadian poet and physician John McCrae’s beautiful poem ” In Flanders fields “
Stained glass Pattern Information
If you are interested in reproducing this panel it is now available as a PDF download in the Pattern Store.
A 916 mm ( approx 36 inches) x 368 mm ( 14.5 inches ) rectangle pattern. Downloadable PDF pattern prints actual size 36 inches x 14.5 inches, ( 916 mm x 368 mm ) across six pages. Instructions are supplied for enlarging the pattern to your required size when printing. You will need “Adobe Acrobat Reader” to print this pattern.
So here is the completed Round Clematis Panel in the window. Lit from behind with natural daylight the background pink is picked up as hues in the flowers. The strip of waterglass emphasises the bottom of the panel, so it would have to be installed this way up. On the right-hand side, the fracture and streamer glass breaks up the background and creates a different light effect. I am happy with the way this has turned out as it has a contemporary feel to it. Also, it looks a lot different from the original smaller pattern but still works. This is particularly satisfying as it’s a primary aim I have when designing patterns. I try to make them as adaptable as possible as far as enlargement and re-sizing go. There is a link at the bottom to download the free pattern. The original pattern is 12″ (305mm) in diameter with instructions for enlarging supplied.
Stained Glass Pattern Information
Downloadable PDF pattern prints actual size 12 inch x 12 inch, ( 305 mm x 305 mm ) across six pages. Instructions provided for enlarging the pattern to your required size when printing. You will need Adobe Acrobat Reader to print this pattern, available free at https://get.adobe.com/reader/.
For those of you who have followed this blog and would like to try a similar piece the original pattern is available here as a free download: Click here to download PDF pattern